White balance for interior paint: getting wall colours right
You spend weeks choosing between three almost identical off-whites, the painter finishes, the room looks lovely, and then you take a photo. Suddenly the wall is lemon yellow, or a strange blue-grey, or two different colours depending on which side of the window it’s on. Your camera hasn’t lied, exactly. It has just guessed wrong about what “white” should be.
White balance is how you correct that guess. Here’s how the Hellophoto team approaches it when photographing painted interiors.
Why walls go wrong
Every light source has a colour. We call it colour temperature and measure it in kelvin (K). Rough ballparks:
- Warm household bulbs: around 2700 to 3000 K, quite orange.
- Neutral or cool white LEDs: roughly 4000 K and up.
- Midday daylight: somewhere around 5000 to 6000 K.
- Open shade or overcast sky: higher again, so bluer.
Your eyes and brain adjust to most of this without you noticing. A white wall looks white to you under a lamp at night and in sunshine at noon. Cameras try to do the same with auto white balance, but they’re working from the whole scene. A room full of warm timber and a cream wall can fool the camera into “correcting” the warmth away, leaving the paint looking cold and grey.
Pale paint colours make it worse. Off-whites and greiges are subtle by design, so a small shift in white balance changes the colour completely.
Mixed light
The hardest case is a room lit by two different sources at once: daylight from a window on one side, warm downlights on the other. No single white balance setting is correct for both. One wall ends up warm and the other cool, even though they’re the same paint. This is the main reason paint colours look patchy in photos.
It’s worth checking the kelvin rating printed on the box when you buy bulbs, because it affects how the paint looks in real life too, not just in photos. Labels like “warm” and “cool” vary between brands; the number is more reliable. If you’re replacing a lot of fittings anyway, EECA, the government’s energy efficiency agency, covers the wider energy side of running a home.
Simple fixes, in order of effort
1. Pick one light source
The quickest improvement: turn off the lamps and photograph by daylight, or close the curtains and use only artificial light. Daylight is usually the better choice for showing paint as most people will see it. An overcast day gives soft, even light with fewer hot spots.
2. Use a white balance preset
Instead of auto, choose the preset that matches your light: daylight, cloudy, shade or tungsten. That stops the camera second-guessing the warmth of the room. It’s not perfect, but it’s consistent, which matters when you’re comparing photos of different rooms or swatches.
3. Use a grey card
A grey card is a cheap piece of card printed in a neutral mid-grey. Put it in the scene, in the same light as the wall, and take a reference frame. Then either:
- use your camera’s custom white balance function to set balance from the card, or
- shoot raw and click on the card with the white balance picker when editing, then copy the setting to the rest of the photos.
Neutral grey is better than white paper for this. Many papers contain optical brighteners that glow slightly blue, which can push the correction warm.
4. Shoot raw
A raw file stores the sensor data before white balance is applied, so you can change it later without loss. JPEGs bake the setting in. If you’re serious about getting paint colour right, raw is the way. Free editors like RawTherapee handle white balance well, and the picker tool alone is worth the learning curve.
Photographing paint swatches
If you’re using photos to help choose paint, a few habits help:
- Paint test patches large. A tiny swatch is hard to judge in person, let alone in a photo.
- Photograph several patches together on the same wall so they share the same light.
- Include the grey card in the first shot of every session.
- Shoot at different times of day. Morning, midday and evening light all change the look. Better to know now than after the whole room is done.
- Don’t trust the phone screen too much. Phones often apply their own colour processing and screens vary. Judge the final choice on the wall itself, in person.
Our earlier post on colour and paint in photos goes into screen calibration and sun versus shade in more detail.
When the photo still looks off
Even with perfect white balance, some colours behave strangely on camera. Camera sensors don’t see colour exactly the way our eyes do, so two paints that match in person can separate in a photo, or the other way round. Some deep greens, teals and purples are particularly tricky.
If one wall stays stubbornly wrong:
- Correct the overall white balance from the grey card.
- Use a targeted adjustment (an HSL or colour mixer panel) to nudge only that hue.
- Compare against the real wall in daylight, not from memory.
Avoid adding warmth or saturation globally to “fix” one colour. It drags timber, skin tones and everything else along with it.
Light reflectance and exposure
Paint charts often list a light reflectance value (LRV), which describes roughly how much light a colour reflects. Very pale walls reflect a lot, which can make the camera underexpose the room, turning white walls grey. Dark walls do the opposite. Watch your histogram and adjust exposure compensation: slightly brighter for pale rooms, slightly darker for dark ones.
The short version
One light source, a fixed white balance, a grey card, raw files and a quick check against the real wall. Do those, and the colour you spent weeks choosing will finally look like itself in the photos too.